simsim44

the correct order would be ; tire , both calipers, the hub and axle as a singal unit , you do not need to remove the big nut from the axle shaft, my french is poor, I hope that helps

www.buggy-vbq.fr Thank YOU. Awesome (thats a good thing) They have what I need, pot échappement

Did you Find an Exhaust pipe for this 260? Modified?

No problem , any time

This is very inexspensive, not a lot of money, 37.00 USD, +S&H, not hard to do and produces big results, big difference If you want speed go with a heavier roller ,they measure 12mmX20mmXponds, (I hope thats right), stock rollers are 10 grams, Idrop to 8.5, Like I said for more torque in the hills the spring was a little harder to do as it is larger than stock Little money, Big difference

the 260 comes with, 30mm , not much adjustment, I removed and installed , the 32mm, with some wireing as the "bystarter valve" is 2 wires and the stock carb is 3 wire

It will be slow going for me till my French is much improved, so please bear with me

here is what I have

Hello to all, I have a XYKD260-1, well if my translations are correct you want rollers, I put 8.5 gram in mine for hill climbing, I also installed a 2500 rpm torque spring, both from Polini, they work well, I also did a 32mm carb (Kiehli), I'm not sure of that spelling,